The 4 Kilometer Transmitter/Receiver For IP Cameras is a point to point access point wireless outdoor cpe.
— 5.8G 300Mbps outdoor CPE/Wi-Fi Bridge Functions
— Exceeds IEEE802.11a/n Standard
— 15dBi High Gain Antenna
— 27dBm Output Power
— Wi-Fi Transimitting Distance Up To Approximately 5000 Meters
— AP/Client operation mode
— Configuration Free
— Selector To Change Channels, IP Address And RF Power Meter
— About -90dBm With Data Rate Up To 300Mbps
— Power Over Ethernet With Support 24V Passive PoE
— Best Choice For Outdoor Wi-Fi Projects
— Support PTP, PTMP, Bridge Operation Mode
— Perfect For Long Range Voice, Video, Data Transmission Applications
Perfect for any outdoor and indoor Uninterrupted Power Supply applications. Great for:
- Security Cameras & Systems [Outdoor & Indoors]
- Street Lights
- Road Sign Equipment
- Any Surveillance System Applications
Got Custom Application That Requires Custom Recommendations?
— Chat With One Of Our Qualified Agents online between the hours of 9:00Am – 5:00Pm CST
— Email our Sales Department to get an answer within 24-hours
— Contact Sales By Phone between the hours of 9:00Am – 5:00Pm to get instant recommendation
1-Year Hardware Warranty
4 Kilometer Transmitter/Receiver For IP Cameras
— Network Standard: IEEE802.3, IEEE 802.11n, IEEE 802.11a
— Operating Frequencies: 5.020 – 6.1000 GHz
— Channels: CH4 ~CH220
— Modulation: OFDM = BPSK,QPSK,16-QAM,64-QAM;DSSS = DBPSK,DQPSK,CCK
— Data Rate: 11n: up to 300Mbps(dynamic), 11a: up to 54Mbps(dynamic)
— Protocol: CSMA/CA,CSMA/CD,TCP/IP,ICMP,NAT,PPPoE, DHCP , Wired static , Wi-Fi Client , UDP, DDNS
— Operating Mode: AP, Gateway, Bridge, WISP
— Security: 64/128bit WEP, WPA(AES,TKIP with IEEE 802.1x), WPA2(AES,TKIP with IEEE 802.1x), WPS
— RF Output Power: 802.11a: 54M 24±2 DB, 6M 26±2DB, 802.11n HT20: MCS7 23±2 DB, MCS0 25±2DB, 802.11n HT40: MCS7 23±2 DB, MCS0 25±2DB.
— Receiving Sensitivity: 802.11a: [email protected]; [email protected] 802.11n HT20: [email protected], [email protected] 802.11n HT40: [email protected], [email protected]
— Antenna: 15dBi MIMO Panel Antenna
— Worrking Temperature: -40°C ~ 55°C
— Interface: 1 * RJ-45 WAN Port, 1 * RJ-45 LAN Port, 1 * Reset Button, 1 * DC Jack, 1 * WDS Switch Button
— Power: Output: DC12V(POE 24V), 1A; Input: 110V/220V
— LEDs: Power, Wi-Fi, WAN, LAN,Signal Strength
What’s Included In The Box?
— 1-Access Point Kit
— 2 Power Supplies
— Instructions & Manuals
1-Year Hardware Warranty
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.